A Pressure Washer can Rigorously Clean Windows

We all want ultra-clear, dirt-free, and streak-free windows, right? But at some point, most of the household members, including ourselves, are likely to get so busy doing our work, school activities, and other tasks, while some of us are just too lazy to maintain the cleanliness of our windows. Even so, leaving the windows unclean will surely cause worse results.

Leaving them unclean and dusty could make things harder for you and your household members. As time goes by, windows will start to accumulate dirt, grime, molds, and stains, until they get thicker and more difficult to eradicate. That’s why proper and regular maintenance of your windows is a must.

However, if you entered the situation where thickened grime, dirt, and molds started to build upon your windows, you might begin to think of some of the most proper and effective ways on how to get rid of them. Well, obviously, you can’t just wipe them with a wet rug with some cleaning solution, that’s why you might come up with a much tougher cleaning hardware – pressure washers.

Pressure Washers Can Efficiently Clean Windows if Used the Right Way

Cleaning your windows with the assistance of a pressure washer can generate fast and desirable results. By using this powerful tool, you can just easily direct the wand onto the windows that are attached to the second floor of your house. However, if you’re not going to be careful, dangers might arise. If you won’t arrange the setting properly, too much-pressurized water could crack or misalign your windows.

As you read on, you’ll get some useful tips and reminders on how you can safely clean your windows with a pressure washer.

Step #1: Ascertain that your windows, especially the glass panes, are in good condition

Before planning on using a pressure washer, you should thoroughly check out first the condition of your windows. Ascertain that there are no cracks, otherwise, the pressurized water might worsen the cracks and break your windows. Just in case you observed that there are parts of the glass panes that you think are highly brittle, do not point the pressure washer onto those areas. You can just manually clean them with a rag and cleaning solution.

Pressure-washing the areas that aren’t in good condition will make things worse. If you think your windows require to be repaired first, then you can temporarily skip your cleaning task. On the other hand, if you think your windows are in good condition and only need cleaning, then you are safe to proceed to clean them with a pressure washer.

Moreover, there are different types of windows. Some of them are able to withstand pressurized water, but some aren’t. So it’s very crucial to take a closer look at your windows so you’ll be certain that you won’t break them.

Step #2: Ascertain that the pressure washer is set to the lowest setting possible

There are some pressure washers that aren’t compatible with cleaning windows as they don’t have the option where you can release low-pressure water. That’s why it’s essential to know if your washer is suitable for cleaning glass panes. Most of the time, electric-powered washers are likely to be more suitable as they produce lower PSI.

The pressure setting must only be around 1,200 to 2,000 PSI. Nothing less than 1,200 and nothing more than 2,000. If the PSI is lower than 1,200, then it might not eliminate the grime and dirt from your windows. But if the PSI is higher than 2,000, your windows might crack. Be strict when following this step. 

After that, it’s important to test first the power of the water coming out of the pressure washer. Point it onto the ground and make some adjustments to reach the most desired spray. You can also adjust the nozzle to a much wider angle. A 25o to 40o nozzle is usually enough.

Step #3: Add cleaning solution to your washer

You can simply use a soap that’s particularly made for pressure washers. Ascertain that the soap you’re using is purely safe for the glass panes and the window frames. However, you can also use a mixture of water, vinegar, or Windex to make your windows clearer. You just need to make sure that the mixture ratio is correct to produce great cleaning results.

Step #4: Straightly aim the wand onto the window

After adding your cleaning solution (soap, or a safe cleaning mixture), start activating the washer and the wand. Aim the wand onto your windows but maintain a safe distance while spraying them with water. It’s best to work starting from the edge of the glass pane towards its center.

Step #5: Start rinsing your windows

After spraying your windows with the mixture of your preferred cleaning solution, turn off the pressure washer. Simply change the tip of the wand into its default tip. To eliminate the cleaning solution you used, set the tip between 25 to 40 degrees. 

Once done, begin spraying from the top of your windows downwards to remove all the soap and dirt that are loosened and softened by the cleaning solution. After removing the dirt and soap, let the windows dry. Ascertain that you have eliminated all the dirt and solution out of the windows.

Leave a Reply

Your email address will not be published. Required fields are marked *